Display; Firmware Version; Error Massages; Unit Converion - Excell SI-130 User Manual

EXCELL PRECISION CO., LTD.
 Display
Low power
indication
TARE
ZERO
 Firmware Version
When power is off, hold
and then press
version and then press
Press key to back to last screen and displays
and then press
 Error Massages
 The EEPROM memory is not working correctly.
 Zero is higher than the zero range when power on the scale.
 Zero is lower than the zero range when power on the scale.
 A/D value is unstable
 A/D IC malfunction (cannot read A/D value).
 The weight of the object is over 9 divisions of the maximum capacity
 The display resolution is greater than internal resolution after calibration.
 G value is not within the range 9.772~9.829
 Error setting
 The weight value is greater than zero range, when re-zero the scale.
 The weight value is below zero range, when re-zero the scale.
 Unit Converion
kg 1 g = 0.001 kg
g 1 g = 1 g
lb 1 g = 0.002204623 lb
lb,oz 1 g = 0.03527396 oz
oz 1 g = 0.03527396 oz
02025100
key and press
key twice to enter
key to display maintenance number
key to exit self-test mode, the scale will restart automatically.
key to wait till display shows
. Press key and displays firmware
.Press
4
g
Weight unit
Pcs
When using counting function,
pcs indication on; otherwise off
for 2 secs.
key and display
ZSME300000339