Datawedge; Enable Datawedge; Disable Datawedge; Adjusting The Scan Beeper Volume - Motorola MC2100 User Manual

NOTE Imager decoding usually occurs instantaneously. The MC2180 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.

DataWedge

Enable DataWedge

To enable DataWedge:
Tap Start > Settings > Control Panel> DataWedge.
1.
Tap Running to start the DataWedge process. The DataWedge Status changes to Ready.
2.
Tap OK.
3.

Disable DataWedge

To disable DataWedge:
Tap Start > Settings > Control Panel > DataWedge.
1.
Tap the Running option to end the DataWedge process. The DataWedge Status changes to Stopped.
2.
Tap OK.
3.

Adjusting the Scan Beeper Volume

To volume level of the scan beep can be changed programmatically using APIs or using applications on the
MC21XX.

Using CtlPanel

To change the beep volume using the CtlPanel application: e the beep volume us e the beep volume us
Select Start > Programs > CtlPanel. elect Start Start > >
1.
Select Select Select Audio Settings. Audio Sett Audio Se
2. . .
Use the navig Use the navigation pad to change Beeper Volume. Select a value between 0 and 3 where 0 is the lowest Use th
3.
and 3 the highest. and 3 the h and 3
Select OK. ct ct
4.
Select Exit.
5.

Using DataWedge

When using DataWedge, the beep volume can only be changed using the DataWedge setting.
Select Start > Settings > Control panel > DataWedge.
1.
Select 3. Basic format.
2.
Select 2. Keystroke output.
3.
Wedge process. The Wedge process. The
er Volume ume
can beep can be chan can beep can be chan
Program Program
Status atus
taWedge aWedge. .
Data Capture
changes to changes to R Rea
3 - 5