Datawedge; Enabling Datawedge; Figure 46: Do Not Swipe Card On Angle - Motorola MC40 User Manual

Figure 46: Do Not Swipe Card on Angle

DataWedge

DataWedge is a utility that adds advanced bar code scanning capability to any application without writing code. It
runs in the background and handles the interface to built-in bar code scanners. The captured bar code data is
converted to keystrokes and sent to the target application as if it was typed on the keypad.
To configure DataWedge refer to the MC40 Integrator Guide.

Enabling DataWedge

Procedure:
1 Touch
.
2
Touch .
3 Touch
.
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge
is enabled.
6 Touch
.
MN000111A02-A | April 2014 |
Data Capture | 63
Send Feedback