3 Touch Panel Unit Operating
Instructions
This section contains detailed information on the operation of Touch Panel Unit.
Before operating Touch Panel Unit, please read this section thoroughly.
When you have read the section, retain it carefully for future reference.
Contents
The box contains the followings.
Please make sure you have all of them.
1 × Touch Panel Unit
Operation of Touch Panel
Install Driver with PS/2 Mouse attached.
See the following page for installation of driver.
Setting Up
1 Before setting Touch Panel Unit to your computer main unit, put four Press Tapes to Touch
Panel Unit and your computer main unit. See illustration below.
2 Put Press Tapes on computer main unit, matching position to Touch Panel Unit.
Avoid CD drive insert.
3 Put Touch Panel Unit to computer main unit firmly with Press Tapes.
4 Connect the cable from Touch Panel to Mouse (PS/2) Connector on computer main unit.
When connecting Touch Panel to computer, make sure the power is off.
1 × Touch Pen
4 × Press Tape Nylon Fasteners (Velcro)
1 × Floppy Disc
1 × Touch Pen
4 × Press Tape
Nylon Fasteners
(Velcro)
1 × Floppy Disc
13