Battery Capacity; Using The Ac Adapter; Using Your Phone; Placing A Call - Sprint LX165 User Manual

Table of Contents

Advertisement

The quality of each call you make or receive depends on the signal strength on your area. The number of
bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the signal.

Battery Capacity

Your Sprint PCS LX165 is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your
battery before it is fully drained. The battery provides approximately 150 minuets of continuous digital
talk time or approximately 150 hours of continuous digital standby time.
Note: Long backlight settings affect the battery's talk and standby times.
When the battery reaches 5% of its capacity, the battery icon blinks. When there is about one minute of
talk time left, the phone sounds an audible alert every 30 seconds and then powers down.
If the battery's charge is completely run down, it takes 2 to 3 hours to fully recharge. It is not necessary to
let the battery completely run down before recharging.
To charge your batteries, use only Sprint PCS-approved charging accessories.

Using the AC Adapter

To charge the battery, plug the AC Adapter into a standard wall outlet and connect it to the phone via the
I/O Connector on the bottom of the phone. Alternatively, you can place the phone in the charging cradle
3.25
provided with your phone and connect the AC Adapter to the back of the cradle.
The battery Charge Status icon animates during charging. When the battery is fully charged, the battery
icon flashes

Using Your Phone

Placing a Call

When the phone is turned on, check the Signal Strength icon to see of you are in a Sprint PCS Service
-
15
-

Advertisement

Table of Contents
loading

Table of Contents