Using The Battery And Charger; Installing And Removing The Battery - Sprint VM4050 Start Manual

Using the Battery and Charger

Installing and Removing the Battery

To Install the Battery:
1. Press and hold the latch on the
phone and slide the battery cover
to remove it.
2. Insert the bottom of the battery
pack into the phone and place
it down.
3. Place the battery cover on the
phone and slide it until the latch
snaps into place.
Note:
Make sure the cover is securely attached to the phone. The battery
pack may separate from the phone if the cover is not properly attached.
To Remove the Battery:
1. Make sure the power is off. Press
and hold the latch on the phone
and slide the battery cover to
remove it.
2. To remove the battery pack, lift
up using the tab at the top of the
battery.
19