Get Your Phone Ready; Install The Battery; Charge The Battery - Sprint WeGo Booklet

Get Your Phone Ready

Install the Battery

1. Insert your fingernail into the slot at the top
of the battery compartment and lift the
cover up gently.
2. Insert the battery, contacts end first, and
gently press the battery into place.
3. Replace the battery compartment cover,
making sure all the tabs are secure and
there are no gaps around the cover.
4. Open the plug of the battery compartment
cover and then place the screw in.
5. Tighten the screw by using the screwdriver
and close the plug of the battery
compartment.
6

Charge the Battery

1. Plug the USB cable into the AC charger.
2. Pull out the plug on the left side on the
phone and plug in the USB cable.
3. Plug the AC charger into an
electrical outlet.