6.4.1 Navigation Panel
Use the menu in the navigation panel to configure NBG6604 features in Access Point Mode.
Figure 22 Navigation Panel: Access Point Mode
Refer to
Table 10 on page 29
6.5 LAN Screen
Use this section to configure your LAN settings while in Access Point Mode.
Click LAN to see the screen below.
Note: If you change the IP address of the NBG6604 in the screen below, you will need to log
into the NBG6604 again using the new IP address.
Figure 23 LAN > LAN IP
Chapter 6 Access Point Mode
for descriptions of the labels shown in the navigation panel.
NBG6604 User's Guide
36