Unit Description; Specifications; Assembly - Shindaiwa EB240 Owner's/Operator's Manual

Unit Description

Using the accompanying illustrations
as a guide, familiarize yourself with
your unit and its various compo-
nents. Understanding your unit
helps ensure top performance, long
service life, and safer operation.
WARNING!
Do not make unauthorized
modifications or alterations to any of
these products or their components.

Specifications

Prior to Assembly
Before assembling, make sure you
have all the components required for
a complete unit:
■ Blower/Engine assembly
■ Blower tube
■ Nozzel
■ This Owner's/Operator's manual
and a tool kit containing a tool
bag, 4 mm hex wrench and a
combination spark plug/13 mm
socket wrench/screwdriver.
■ Tool bag
Carefully inspect all components for
damage.
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
Shindaiwa reserves the right to make
subsequent modifications to this unit
without prior notification.
Specifications subject to change
without notice.
4
Handle
Choke
Control
Recoil/
Starter
Handle
Air
Cleaner
Cover
Fuel Fill
Cap
Nozzle
Model Name ............................................................................................
Engine Model ..........................................................................................
Engine Type ............................................................................................
Dry Weight (Excluding blower tubes.) ......................................................
Bore x Stroke ..........................................................................................
Displacement ..........................................................................................
Engine Speed at Maximum Power Output ................................................
Maximum Power Output .........................................................................
Engine Speed at Idling .............................................................................
Maximum Engine Speed ..........................................................................
Fuel/Oil Ratio .........................................................................................
Fuel Tank Capacity .................................................................................
Carburetor ..............................................................................................
Ignition System .......................................................................................
Spark Plug ..............................................................................................
Air Cleaner ..............................................................................................
Starting Method ......................................................................................
Stopping Method .....................................................................................
Dimensions (L x W x H) ...........................................................................
Sound Pressure Level ..................................................................... Idling
(in accordance with ISO 7917)
Sound Power Level ......................................................................... Idling
(in accordance with ISO 3744)
Vibration Level ............................................................................... Idling
(in accordance with EN 28662)
Ignition
Blower
Switch
Discharge
Blower
Tube
Throttle
Spark Plug
Boot
Exhaust
Outlet
Fuel Primer Bulb
Blower Air
Intake
EB240/EC1
SEB240EC
2-cycle, vertical cylinder, air cooled
4.2kg
33mm x 28mm
23.9 cm 3
-1
7,500 (min ) rpm
0.7 kW
2,500 (min -1 ) rpm
8,000 (min -1 ) rpm
50:1
3
500 cm
Walbro diaphragm with primer pump
Fully Electronic, transistor controlled
NGK BMR6A
Dry Element Type
Recoil Starter
Toggle Switch
330 x 230 x 330mm
72 dB (A)
WOT 94 dB (A)
82 dB (A)
WOT 105 dB (A)
2
4.4m/s
WOT 12.3m/s 2