Playing Back A Tape; Playing Back A Tape - Basic Operation - JVC UX-G66 Instructions Manual

Consists of ax-uxg66, xt-uxg66, td-uxg66, and sp-uxg66.
Hide thumbs Also See for UX-G66:
Table of Contents

Advertisement

Available languages

Available languages

Playing Back a Tape

DISPLAY
/CHARA.
CANCEL
UP
<
>
SET
DOWN
MD
AUX
TAPE
CD
FM/AM
VOLUME
You can listen to Normal (Type I), High position (TypeII),
and Metal (Type IV) type tapes without further settings.
• When using the inner buttons, press OPEN/CLOSE button
on AX-UXG66 unit to open the sliding panel first.
• When using the remote control, press TAPE 23
(playback) button first and 7 (stop) button successively.
DO NOT use tapes longer than 120 minutes.
The characteristic deterioration may occur and these
tapes easily jam in the tape transport mechanism.
Playing Back a Tape — Basic Operation
1
Press 0 (open/close) button on the cassette deck
unit.
The system automatically turns on and the tape tray
comes out.
2
Place a tape on the tray with the side you want to
listen to facing up (forward side).
Tape fits in the caved-in area so that an exposed edge
of the tape faces toward the inside of the unit.
DISPLAY
/CHARA.
TAPE ` (playback)
7 (stop)
4 / ¢
DOLBY B NR
REC PAUSE
3
Press 0 (open/close) button again to close the tray.
4
Press ` (playback) button on the unit or
TAPE ` (playback) button on the remote control.
The tape playback starts and the tape direction indicator
blinks slowly in orange to show the tape running
direction.
• Each time you press ` (playback) on the cassette
Buttons behind the sliding panel
4
¢
SET
CANCEL
ENTER
4 ¢
π (auto reverse)
0 (open/close)
AUTO
REVERSE
REC
` (playback)
DOLBY B NR
Tape operation indicators
• DO NOT try to open or close the tape tray by
hands as it will be damaged.
• DO NOT place any foreign matters.
• DO NOT prevent the tray from opening and
closing, because it may results damages on the
unit.
Tape direction indicator
REC
deck unit or TAPE ` (playback) button on the remote
control, you can change the tape sides to be played
back currently.
3 3 3 3 3 : plays the forward side.
2 2 2 2 2 : plays the reverse side.
Playback comes to an end (Auto Reverse)
The cassette deck unit automatically changes the tape
direction to the reverse side, and continue playback
both sides. Each time to press the button, Auto
Reverse feature is set to on/off alternately.
PLAY
REC
TITLE
CLOCK
MODE
MODE
/EDIT
/TIMER
7 (stop)
20

Advertisement

Table of Contents
loading

Table of Contents