Table of Contents
Advertisement
Infrastructure Client Interface
Enter the name of the SSID to which Workgroup Bridge will connect.
SSID
Click Site Survey button to choose from the list. It's necessary for
Workgroup Bridge to connect to remote access point.
Normally, Workgroup Bridge connects to a remote access point by
Remote MAC
matching SSID. When more than one remote access point have the
Address
same SSID, Workgroup Bridge can connect to different remote access
points.
Optional: You can specify the MAC address of the remote access point
to limit Workgroup Bridge's connection to a specific remote access
point.
The format is xx:xx:xx:xx:xx:xx.
Enter the VLAN ID for Workgroup Bridge.
VLAN ID
When VLAN function is enabled, Workgroup Bridge only forwards
packets with specified VLAN to remote access points.
The list is only applicable when VLAN function is enabled.
Select the desired mode from the list.
Security Mode
•
Disabled
•
WPA-Personal
•
WPA2-Personal
45
Advertisement
Table of Contents
