Table of Contents
Advertisement
Username
Password
Email Address for
Logs
Log Queue Length
Log Time Threshold
Syslog
Syslog Notification
IP Type
Server IP Address
Enter the Username to login to your SMTP server.
The Username can include up to 32 characters. Special characters
are allowed.
Enter the Password to login to your SMTP server.
The Password can include up to 32 characters. Special characters
are allowed.
Enter the email address the log messages are to be sent to.
Valid characters include alphanumeric characters, "_", "-", "." and
"@". Maximum length is 64 characters.
Enter the length of the queue: up to 500 log messages. The
default is 20 messages. When messages reach the set length the
queue will be sent to the specified email address.
Enter the time threshold (in seconds) used to check if the queue is
full. It's a value from 1 to 600 and default is 600 seconds.
Enable Syslog notification.
Select the IP type of the syslog server: IPv4 or IPv60029.
Enter the IPv4 or IPv6 address of syslog server here.
13
Advertisement
Table of Contents
