Table of Contents
Advertisement
5
59
•
Reboot—Reboots the device. Since any unsaved information in the Running
Configuration is discarded when the device is rebooted, you must click Save
in the upper-right corner of any window to preserve current configuration
across the boot process. If the Save option is not displayed, the Running
Configuration matches the Startup Configuration and no action is necessary.
The following options are available:
-
Immediate—Reboot immediately.
-
Date—Enter the date (month/day) and time (hour and minutes) of the
schedule reboot. This schedules a reload of the software to take place
at the specified time (using a 24-hour clock). If you specify the month
and day, the reload is scheduled to take place at the specified time and
date. If you do not specify the month and day, the reload takes place at
the specified time on the current day (if the specified time is later than
the current time) or on the next day (if the specified time is earlier than
the current time). Specifying 00:00 schedules the reload for midnight.
The reload must take place within 24 days.
This option can only be used if the system time has either been set
NOTE
manually or by SNTP.
-
In—Reboot within the specified number of hours and minutes. The
maximum amount of time that can pass is 24 days.
•
Reboot to Factory Defaults—Reboots the device by using the factory
default configuration. This process erases the Startup Configuration file, and
the backup configuration file. The mirror configuration file is not deleted
when restoring to factory default.
•
Clear Startup Configuration File—Check to clear the startup configuration
on the device for the next time it boots up.
Clearing the Startup Configuration File and Rebooting is not the same
NOTE
as Rebooting to Factory Defaults. Rebooting to Factory Defaults is more
intrusive.
Administration: General Information
Cisco Small Business 200 Series Smart Switch Administration Guide
Rebooting the Device
Advertisement
Table of Contents
