8
107
-
Port ID—Identifier of port advertised in the port TLV.
•
Capabilities TLV
-
Capabilities—Capabilities advertised in the port TLV)
•
Version TLV
-
Version—Information about the software release on which the device is
running.
•
Platform TLV
-
Platform—Identifier of platform advertised in the platform TLV.
•
Native VLAN TLV
-
Native VLAN—The native VLAN identifier advertised in the native VLAN
TLV.
•
Full/Half Duplex TLV
-
Duplex—Whether port is half or full duplex advertised in the full/half
duplex TLV.
•
Appliance TLV
-
Appliance ID—Type of device attached to port advertised in the
appliance TLV.
-
Appliance VLAN ID—VLAN on the device used by the appliance, for
instance if the appliance is an IP phone, this is the voice VLAN.
•
Extended Trust TLV
-
Extended Trust—Enabled indicates that the port is trusted, meaning that
the host/server from which the packet is received is trusted to mark the
packets itself. In this case, packets received on such a port are not re-
marked. Disabled indicates that the port is not trusted in which case, the
following field is relevant.
•
CoS for Untrusted Ports TLV
-
CoS for Untrusted Ports—If Extended Trust is disabled on the port, this
fields displays the Layer 2 CoS value, meaning, an 802. 1 D/802. 1 p priority
value. This is the COS value with which all packets received on an
untrusted port are remarked by the device.
•
Power TLV
Cisco Small Business 200 Series Smart Switch Administration Guide
Administration: Discovery
Configuring CDP