Cisco Small Business 200 Administration Manual page 114

8
STEP 2
101
• Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
• Status—Whether TLVs are being transmitted or if they are overloaded.
To view the overloading details for a port, select it and click Details.
This page contains the following information for each TLV sent on the port:
• LLDP Mandatory TLVs
- Size (Bytes)—Total mandatory TLV byte size.
- Status—If the mandatory TLV group is being transmitted, or if the TLV
group was overloaded.
• LLDP MED Capabilities
- Size (Bytes)—Total LLDP MED capabilities packets byte size.
- Status—If the LLDP MED capabilities packets were sent, or if they were
overloaded.
• LLDP MED Location
Size (Bytes)
-
Status
- —If the LLDP MED locations packets were sent, or if they were
overloaded.
• LLDP MED Network Policy
Size (Bytes)
-
Status
- —If the LLDP MED network policies packets were sent, or if they
were overloaded.
• LLDP MED Extended Power via MDI
- Size (Bytes)
size.
Status
- —If the LLDP MED extended power via MDI packets were sent, or
if they were overloaded.
• 802.3 TLVs
Size (Bytes)
-
- Status —If the LLDP MED 802.3 TLVs packets were sent, or if they were
overloaded.
—Total LLDP MED location packets byte size.
—Total LLDP MED network policies packets byte size.
—Total LLDP MED extended power via MDI packets byte
—Total LLDP MED 802.3 TLVs packets byte size.
Cisco Small Business 200 Series Smart Switch Administration Guide
Administration: Discovery
Configuring LLDP