Arrayed Speaker (Cluster) - K&F PASSIO User Manual

User's Manual
4.
If the loudspeaker are operated through K&F system controller, we recommend to use the
switchable filter 'cluster' for this operation. So you can optimize the frequency response for
this application.
When operating the systems without any K&F system controller, you should decrease the
frequencies below 300 Hz for 3-4 dB.
Mount the speakers securely. To avoid injury or damage, always be sure to mount the
speakers securely so that they do not fall. Speakers, which are stacked, must be secured.
When laying the connecting cables, make sure that nobody can trip.
Caution
Please take note of the enclosure angles of each 6° at the top and bottom.
Combination
PASSIO with
PASSIO
Setup:
KLING & FREITAG GMBH © 2017

Arrayed Speaker (Cluster)

standing speakers
Increasing the
horizontal
coverage angle,
e.g. for wide
audience areas
Angle 1 Angle 2
35°
Increasing the
horizontal
coverage angle
and sound
pressure level for
larger distances
Version 3.0
A smaller angle
3 results in a
smaller vertical
coverage angle
but increases the
sound power
level.
Angle 3
45° 20° - 30°
Increasing the
vertical angle,
e.g. for covering
balconies
K&F PASSIO
Page 9 of 26