7.1.3 Controller Mode with Subwoofer in Overlap Mode 7.1.4 Controller Mode with Subwoofer in 1-Channel Mode Passive Mode (without Controller) Dimensions Measuring Diagrams Frequency range PASSIO Coverage PASSIO Technical Specifications EC Declaration of Conformity Accessories Care and Maintenance 13.1 Inspection Regulations 13.2...
Thank you for purchasing a KLING & FREITAG product. To guarantee a trouble-free operating of the equipment and to allow your KLING & FREITAG PASSIO system to achieve its full potential read the user's manual carefully before use. This item is a quality accessory for the PASSIO speaker system.
'Pin-Joint Adapter PASSIO' in 90° intervals. Mounting point K&F VariPoint for mounting the optional accessory 'Adjustable Speaker Mount PASSIO' or 'Pin-Joint Adapter PASSIO' - uses M10 bolt or the quick connector K&F 'Fixing Pin'. (2x) SpeakOn connector 4-pin NLT4MP (parallel) 2nd safety bar for 5 mm chain quick link (quick link not included in purchased parts package).
User's Manual K&F PASSIO Safety Instructions Mounting the Speakers / Wall and Ceiling Installation Suspended loads pose a safety risk. Only qualified technicians are permitted to perform the installation steps. Be sure to use personal protective equipment at all times.
Page 8
24 dB/oct. at 60 Hz has to be inserted into the signal chain. Operations with K&F SystemRack: • For optimal performance and operating safety of the PASSIO speakers we recommend using the K&F SystemRack. • When a power amplifier is overloaded at the output (clipping), then the amplifier activates a clipping warning signal.
User's Manual K&F PASSIO Arrayed Speaker (Cluster) If the loudspeaker are operated through K&F system controller, we recommend to use the switchable filter 'cluster' for this operation. So you can optimize the frequency response for this application. When operating the systems without any K&F system controller, you should decrease the frequencies below 300 Hz for 3-4 dB.
User's Manual K&F PASSIO Wiring Instructions • Before connecting your PASSIO loudspeaker switch off all equipment and turn down all level controls. • Only use high-quality speaker cables with a sufficient wire gauge. The wire gauge depends on the length of the speaker cable.
K&F CD 44 hardware user's manual. 7.1.1 Controller Mode 'Full-Range' If you want to operate the speaker in fullrange mode, then select the LSBlock Passio in the CD 44. Activate the filter Cluster for the top If you need a higher bass level, activate...
K&F PASSIO 7.1.2 Operations with Controller and Subwoofer If you want to operate the PASSIO with an additional K&F subwoofer, then select the LSBlock Passio in the CD 44. Activate the filter Cluster for the top If you need a boost in the high frequency speakers via Filter B if you wish to range (e.g.
7.1.3 Controller Mode with Subwoofer in Overlap Mode In full-range mode, the speaker PASSIO is compatible with all K&F subwoofers that are run in the 100 Hz mode. This so-called 'overlap mode' can make sense for surround uses when the tops should transmit the complete frequency spectrum and the subwoofer is used as an 'effect bass'.
K&F PASSIO Passive Mode (without Controller) The PASSIO system is designed so that it can be operated passively without a controller directly on a power amplifier. Follow the instructions in chapter "Protecting the Speakers / Operating Safety" beginning on page 7.
User's Manual K&F PASSIO 10. Technical Specifications PASSIO Concept Passive 2-Way-bass reflex system Operated with K&F PLM+ Serie, K&F D-Serie, Lab.Gruppen IPD 2400, K&F SystemRack, K&F TOPAS, passiv at linear Amps Frequency range @-10 dB 75 Hz – 31 kHz Frequency range @±3 dB...
CA 1215 -6/-9 NOMOS XLT SONA SUB **) CA 1515 -6/-9 PASSIO **) SONS SUB II GRAVIS 8 W PASSIO SUB 12 SW 112 GRAVIS 12 N/W* PASSIO SUB 15 SW 115D *) GRAVIS 12+ N/W/XW SCENA 15 SW 115E...
Colour: black or white Pin-Joint Adapter PASSIO - pin fixing with 'Fixing Pin' and clamp lever For quick mounting of the PASSIO on i.e. a Super Clamp or a TV-Spigot using the Fixing Pin. Colour: black Pin-Joint Adapter PASSIO - screw fixing...
Page 21
Mini TV spigot with internal M10 thread. Necessary for suspending the Adjustable Speaker Mount with a Super Clamp! for use with the accessory Adjustable Speaker Mount PASSIO with a 'Super Clamp' Colour: black Stand socket M10 for use with the Adjustable Speaker...
Page 22
Examples of use: Application example Adjustable Speaker Application example Adjustable Speaker Mount PASSIO with stand adapter M10 Mount PASSIO with 'Mini TV Spigot' and 'Super Clamp' on a horizontal pipe Application example Pin-Joint Adapter Application example Pin-Joint Adapter PASSIO with 'Super Clamp' on a...
(see item number) or with open terminals (on the mains side). Warning The PASSIO system can exhibit signs of wear over the years, for example, from mechanical strain, transport damage, corrosion, or improper handling. Remember that flying speakers always impose a high safety risk.
14. Transportation and Storage The PASSIO is protected against short-term moisture. despite, be sure to store, transport, and use the accessories in dry environments only. The PASSIO System is not designed for long-term use in a corrosive environment. Make sure that the system is adequately ventilated during longer storage periods so any residual moisture can escape from the equipment.
User's Manual K&F PASSIO The icon indicates that the equipment was distributed on or after 13 August 2005 and must not be disposed of through household waste. Unfortunately, the European WEEE directive was implemented in different national legislation in the EU member states, making it impossible to offer a consistent disposal solution throughout Europe.