Controller Mode With Subwoofer In Overlap Mode; Controller Mode With Subwoofer In 1-Channel Mode - K&F PASSIO User Manual

Hide thumbs Also See for PASSIO:
Table of Contents

Advertisement

User's Manual
If necessary, adjust the correct level balance with the output gain of the subwoofer on the
K&F systemamp or systemrack.
7.1.3
In full-range mode, the speaker PASSIO is compatible with all K&F subwoofers that are run in
the 100 Hz mode.
This so-called 'overlap mode' can make sense for surround uses when the tops should
transmit the complete frequency spectrum and the subwoofer is used as an 'effect bass'.
In the overlap mode, the bass boost must not be switched on.
Tip
7.1.4
You can operate the speaker PASSIO together with several K&F subwoofers on a single
controller channel. To do so, load the matching LSBlock for the speaker combination into the
controller. For further information please see the user's manual of the subwoofers that are
suitable for 1-channel mode, e.g. PASSIO SUB 12/15.
KLING & FREITAG GMBH © 2017

Controller Mode with Subwoofer in Overlap Mode

Controller Mode with Subwoofer in 1-Channel Mode

Version 3.0
K&F PASSIO
Page 13 of 26

Advertisement

Table of Contents
loading

Table of Contents