8.2 ABC Mode
This mode is indicated by ABC. When typing in ABC mode, you should press the
key labeled with the required character:
Once for the first character;
-
Twice for the second character and so on.
-
When using ABC mode, you will see the numeric key with letter, press the key and
hold: until see the letter which you want.
Validate after undo the key.
For example: you press the 2 key ,screen will display "a, b, c, A, B, C" one by one.
8.3 123 Mode
Enter the figure directly. If you enter the wrong letter, please press Delete key to
cancel( Press Down key to enter the blank and press Up key to return the curser).
8.4 Symbol Input mode
In any other input modes, you can press the ∗ ∗ key to enter the symbol input mode:
then use Down and 1~8 keys to select the desired symbol.
SAGEM RT1000 User Manual
_________
46