Main Functions Of The Sagem Rt1000; Initialization Of The Phone - Sagem RT1000-V2 User Manual

6 Main functions of the SAGEM RT1000

6.1 Initialization of the Phone

When the phone is switched on, the backlight of the screen will be bright, then the
LCD will display, depending on the version:
- either:
or the Network operator's logo.
-
Enter the PIN of the SIM card if requested.
If you switch on the phone without the SIM card or the SIM card is not correctly
installed, the screen will display
AUTOPIN option
If the phone is delivered with AUTOPIN option, the first time the SIM card is
used, after you have entered the PIN1 (if entering PIN1 is requested), the
phone will change the PIN1 of the SIM card and replace it by an other value.
Then if the phone is switched on again, it will never more asked to enter the
PIN1.
Support of PIN1
When AUTOPIN option is not enabled, PIN1 functions are supported
according to GSM 11.11 standard:
After several wrong entries of PIN1 code (the exact number depends on
-
the used SIM card),PUK1 code will be required
Modification of PIN1 code of the SIM card after entry of correct PIN1 code
-
- To enable and disable the PIN1 check when the phone is switched on
SAGEM RT1000 User Manual
_________
" Please Check SIM card".
26