Outgoing Calls - Sagem RT1000-V2 User Manual

SET TIME
-: -: -
-:-
Network Name
04-06-30
10:30

6.2 Outgoing calls

There are two modes for dialing on this phone: handset mode and Hand-free mode.
Handset mode
Pick up the handset: you will hear the dialing tone and it will be displayed on the
screen: "dial please".
Then enter the phone number of the person you want to call, and press OK key (or
# key if enabled: see section 7.4.6).
If you don't press any of these two keys, the call will be set up after expiration of the
maximum inter-digit time which can be adjusted by yourselves (see section 7.4.5).
At that time you will hear the sound of conjunction and you should wait until the
called party will receive the call. If you hear the busy tone, please put down the
handset.
You can call again the last dialed number by pressing Redial key.
When the calling party has answered successfully, the screen will show the duration
of the call. At the end of the call, just put down the handset, that's all.
Hand-free mode
Press the Hand-free key; after you hearing dialing tone, the next steps are the
same as in handset mode.
During handset mode or hands-free mode ,you can press the Phone Book key ,and
then you entering the phonebook , then you can use the up or down or digit keys to
jump to the corresponding letter to find the number you want to call, and then just
press OK key to set up the call.
SAGEM RT1000 User Manual
_________
Enter the correct
date by year-month-day (e.g.: 04-06-30)
and time by hour-minute (e.g.: 10:30)
27