Sagem RT1000-V2 User Manual page 30

During a call with correspondent B, if an other correspondent C is calling you, the
phone number of C will appear on the screen under B number .
You have four options:
1. Press OK key, and press 0 key: to continue dialog with B and to reject call from
C.
2. Press OK key, and press 1 key: to end the call with B and to start the talk with C.
3. Press OK key, and press 2 key: to put call with B on hold, and to start the talk
with C. You can repeat this step (OK key + 2 key) to switch again the talk with B
and to put call with C on hold.
4. Press OK key, and press 3 key: to talk to B and C at the same time (if conference
call is supported by the network and included in your subscription).
Depending on the network operator, it is possible to handle up to 5 parties in
parallel.
During a call with correspondent B, you may also decide to call a correspondent C:
1. Press OK key, and press 2 key: to put call with B on hold, and to start the talk
with C. You can repeat this step (OK key + 2 key) to switch again the talk with
B and to put call with C on hold.
2. Press OK key, and press 3 key: to talk to B and C at the same time (if
conference call is supported by the network and included in your subscription).
Depending on the network operator, it is possible to handle up to 5 parties in
parallel.
SAGEM RT1000 User Manual
_________
30