Outline; Product Checking And Parts Identification; Accessory - Mitsubishi Electric FR-E700 Instruction Manual

1 OUTLINE

1.1

Product checking and parts identification

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
FR -
E740
No. Voltage class
E720 Three-phase 200V class
Three-phase 400V class
E740
Single-phase 200V class
E720S
Single-phase 100V class
E710W
Cooling fan
The cooling fan is removable.
Operation panel
(Refer to page 2)
PU connector
(Refer to page 9)
Voltage/current input switch
(Refer to page 9)
USB connector cover
Refer to the Instruction
Manual (Applied) for how to
open the cover.
Front cover
Refer to the Instruction
Manual (Applied) for
installation/removal.
PU connector cover
Refer to the
Instruction Manual
(Applied) for how to
open the cover.
Capacity plate
FR-E740-3.7K

• Accessory

· Fan cover fixing screws (M3 × 35mm)
These screws are necessary for compliance with the EU Directive (Refer to page 47)
FR-E720-1.5K to 3.7K, FR-E740-1.5K to 3.7K, FR-E720S-0.75K to 2.2K
FR-E720-5.5K to 15K, FR-E740-5.5K to 15K
Harmonic suppression guideline (when inverters are used in Japan)
All models of general-purpose inverters used by specific consumers are covered by "Harmonic suppression guideline for consumers who
receive high voltage or special high voltage". (For further details,
Product checking and parts identification
-
3.7 K
Represents the
inverter capacity [kW]
Example of FR-E740-3.7K
Inverter model
Serial number
Capacity
refer to Chapter 3 of the Instruction Manual (Applied).)
Control logic switchover jumper
connector
The jumper connector is in the sink logic
(SINK) when shipped from the factory.
Move the jumper connector to change to
the source logic (SOURCE). Always fit the
jumper connector to the either position.
( Refer to the Instruction Manual (Applied))
Main circuit terminal block
(Refer to page 10)
Combed shaped wiring cover
Refer to the Instruction Manual
(Applied) for installation/removal.
Rating plate
FR-E740-3.7K
Inverter model
Input rating
Output rating
Serial number
Quantity
1
2
1
USB connector
(mini-B connector)
(Refer to page 9)
Connector for plug-in
option connection
(Refer to the instruction
manual of options.)
Control circuit terminal
block
(Refer to page 10)
1