Single-Phase 200V Class; Single-Phase 100V Class - Mitsubishi Electric FR-E700 Instruction Manual

Wiring
FR-E720-11K, 15K
R/L1 S/L2 T/L3 N/-
Power supply

Single-phase 200V class

FR-E720S-0.1K to 0.4K
N/-
R/L1 S/L2
Power supply

Single-phase 100V class

FR-E710W-0.1K to 0.4K
R/L1 S/L2
Power supply
NOTE
Make sure the power cables are connected to the R/L1, S/L2, and T/L3. (Phase need not be matched.) Never connect
the power cables to the U, V, and W of the inverter. Doing so will damage the inverter.
Connect the motor to U, V, and W. Turning ON the forward rotation switch (signal) at this time rotates the motor
counterclockwise when viewed from the load shaft.
12
P/+ PR
Jumper
IM
Motor
Jumper
P/+ PR
IM
Motor
N/- P/+ PR
IM
Motor
FR-E740-11K, 15K
N/- P/+ PR R/L1 S/L2 T/L3
Jumper
Power supply
FR-E720S-0.75K to 2.2K
N/- P/+
Jumper
R/L1 S/L2
PR
Power supply
FR-E710W-0.75K
N/- P/+
R/L1 S/L2
PR
Power supply
IM
Motor
IM
Motor
IM
Motor