Advertisement
3.1.4 Removing the Display board (See Fig.6)
(1) Remove the six screws E attaching the Display board.
(2) Disconnect the card wire from Key board connected to con-
nector
CON402
and
CON403
CON403
E
3.1.5 Removing the DVD MPEG board (See Fig.7, 8)
(1) Remove the two screws F attaching the DVD MPEG board.
(See Fig.7)
F
(2) Disconnect the card wire from DVD MPEG board connect-
ed to connector
SCON1
Fig.8)
(3) Disconnect the connector wire from DVD VCC board con-
nected to connector
SCON2
(See Fig.8)
(4) Disconnect the card wire from Main board connected to
connector
CN702
of the DVD MPEG board. (See Fig.8)
(5) Disconnect the connector wire from Main board connected
to connector
CON101
Fig.8)
(6) Disconnect the connector wire from USB board connected
to connector
CON703
Fig.8)
CON703
CON101
SCON2
1-8 (No.MB744<Rev.001>)
of the Display board.
E
CON402
Fig.6
Fig.7
of the UPGRADE board. (See
of the DVD MPEG board.
of the DVD MPEG board. (See
of the DVD MPEG board. (See
SCON1
CN702
Fig.8
3.1.6 Removing the USB board (See Fig.9)
(1) Disconnect the connector wire from USB board connected
to connector
CON301
(2) Disconnect the card wire from USB board connected to
connector
CON201
of the Main board.
(3) Remove the two screws G attaching the USB board.
G
3.1.7 Removing the Main board (See Fig.10, 11, 12)
(1) Remove the two screws H attaching the Main board. (See
Fig.10)
(2) Remove the three screws J and two screws K attaching the
DC motor. (See Fig.11)
(3) Disconnect the connector wire from DC motor connected to
connector
MTCON1
of the Main board. (See Fig.11)
(4) Disconnect he card wire from Tuner pack connected to
connector
CON603
of the Main board. (See Fig.11)
MTCON1
M
J
K
of the Main board.
CON301 CON201
Fig.9
H
Fig.10
M
CON603
J
Fig.11
Advertisement
