(4) Lift up the cover; remove the two screws F attaching the
Cover. (See Fig.7)
3.2.3 Removing the Power board (See Fig.8)
(1) Disconnect the power cord connected to connector
of the Power board.
(2) Disconnect the connector wires from Amp board connect-
ed to connectors
CON901
board.
(3) Remove the eight screws G attaching the Power board.
G
G
1-10 (No.MB744<Rev.001>)
Fig.7
CON01
and
CON902
of the Power
CON01
G
CON902
CON901
Fig.8
3.2.4 Removing the Amp board (See Fig.9, 10)
(1) Remove the four screws H attaching the Back plate. (See
Fig.9)
F
(2) Remove the four screws J attaching the Amp board. (See
Fig.10)
J
H
Fig.9
Fig.10
J