Cisco Firepower 4100 Series Hardware Installation Manual page 18

Hardware Bypass (FTW) Network Modules
The following figure shows the front panel view of 40G FTW network module. Pair the two ports to create
a hardware bypass paired set.
Figure 10: Firepower Network Module 40G with Hardware Bypass
1
3
Cisco Firepower 4100 Series Hardware Installation Guide
14
Bypass LEDs B1 through B4
• Solid green – In Standby
mode.
• Blinking amber – Port is in
hardware bypass mode,
failure event.
• Solid amber – Port is in
hardware bypass mode,
forced.
Captive screw/handle
Bypass LED BP
• Solid green – In Standby
mode.
• Blinking amber – Port is in
hardware bypass mode,
failure event.
• Solid amber – Port is in
hardware bypass mode,
forced.
Ethernet X/1
2
Ports 1 and 2 are paired together to
form a hardware bypass pair.
4 Ethernet X/2
Ports 1 and 2 are paired together to
form a hardware bypass pair.
Overview