Canon iPF720 Service Manual page 40

Chapter 1
[Paper Details]
(The paper type is displayed here.)
[Job Management]
[Job Queue Ope.]
[Com. BOX Ope.] [Job List]
[Psnl. BOX Ope.]
1-26
Setting Item
[Roll DryingTime]
[Scan Wait Time]
[Feed Priority]
[Adjust Length]
[Head Height]
[Skew Check Lv.]
[VacuumStrngth]
[Width Detection]
[NearEnd RollMrgn]
[Cut Speed]
[Trim Edge First]
[Cutting Mode]
[Bordless Margin]
[CutDustReduct.]
[Manual Feed]
[NearEnd Sht Mrgn]
[Return Defaults]
Setting Item
[Job List] (Choose a print
job)
(Choose a print
job)
[Print Job List]
[Folder List] (Enter a password
if one has been
set.)
T-1-13
Specify the time to wait for the ink to dry for each sheet.
Specify the time to wait for the ink to dry between each scan in bidirectional printing,
in consideration of how quickly the paper absorbs ink. Note that printing will take
longer if you specify a wait time.
Specify exact paper feeding, if desired. Normally, select Automatic . Choose Print
Length if you prefer to feed the paper an exact amount. However, note that choosing
Print Length may result in slight banding in the direction of Carriage scanning.
Displayed if Feed Priority is Print Length .
Adjustment relative to the amount of stretching or shrinkage of the current paper.
For paper that tends to stretch, increase the feed amount by setting the adjustment
value toward +. For paper that tends to shrink, decrease the feed amount by setting
the adjustment value toward -.
The setting for the amount of paper stretching or shrinkage is relative. If you access
it again later, it will be displayed as 0.00 %.
Adjust the Printhead height.
If you print on Japanese Paper Washi or other handmade paper that has an irregular
width, choose Loose for a higher skew detection threshold, or choose Off to disable
skew detection.
However, if paper is loaded askew when detection is Off , note that paper jams or
Platen soiling may occur.
If strict skew detection is required, choose High Accuracy.
Specify the level of suction that holds paper against the Platen .
Make this setting when the print size is different from the media size, for example,
when you want to make a print within a frame.
When you select [OFF], the paper width is not detected.
Specify a margin at the leading edge of roll paper to ensure better printing quality at
the leading edge.
Note that if you choose 3 mm , it may lower the printing quality at the leading edge
and affect feeding accuracy. The printed surface may be scratched, and ink may
adhere to the the leading edge.
Choose the cutting speed. For media such as film that are more likely to generate
debris when cut, choose Fast to reduce the amount of debris.
The leading edge of roll media is cut when it is loaded.
Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after printing. If you choose
Eject , the paper will not be cut after printing. Instead, a line will be printed at the
cut position.
Adjust the margin during borderless printing.
Choose On to reduce the amount of debris generated when cutting film and similar
media by printing a line at the cut position. This option reduces the amount of debris
given off after cutting.
Choose how the paper is supplied, Top for printing from the Tray or Front for
printing from the Front Paper Feed Slot .
Specify a margin at the leading edge of sheets to ensure better printing quality at the
leading edge.
Note that if you choose 3 mm , it may lower the printing quality at the leading edge
and affect feeding accuracy. The printed surface may be scratched, and ink may
adhere to the the leading edge.
If you have selected 20 mm , the test print sheet may not be printed completely.
Choose Yes to restore Med.Detail Set. to the factory default values.
T-1-14
[Delete]
[Priority]
[Print]
[Delete]
[Job List]-[Print]
[Job List]-[Delete]
[Print Job List]
Description, Instructions
Description, Instructions
Delete the current job or queued jobs.
Print the job first after the current print job is
finished printing.
Print jobs in the Common Box.
Delete jobs in the Common Box.
Print a list of jobs in the Common Box.
Print jobs in Personal Boxes.
Delete jobs in Personal Boxes.
Print a list of jobs in Personal Boxes.