Safety Precautions - Toshiba TOSVERT VF-AS1 Instruction Manual

High performance
Hide thumbs Also See for TOSVERT VF-AS1:
Table of Contents

Advertisement

Ⅰ. Safety precautions
The items described in these instructions and on the inverter itself are very important.
Read these precautions and warnings to prevent injury to yourself and other people
around you as well as prevent damage to property in the area.
Thoroughly familiarize yourself with all safety precautions and etc. on the
instruction manual of the VF-AS1/PS1/AS3,
manual. Make sure that you observe all warnings given.
■ General Operation
▼ Never disassemble, modify or repair. This can result in electric shock, fire
and injury. For repairs, call your sales agency.
Disassembly
prohibited
▼ Never remove the front cover when power is on or open door if enclosed in
a cabinet. The unit contains many high voltage parts and contact with them
will result in electric shock.
Prohibited
▼ Don't stick your fingers into openings such as cable wiring hole and cooling
fan covers. This can result in electric shock or other injury.
▼ Don't place or insert any kind of object into the inverter (electrical wire
cuttings, rods, wires). This can result in electric shock or fire.
▼ Do not allow water or any other fluid to come in contact with the inverter.
This can result in electric shock or fire.
▼ Wiring must be done after turning off all input power to the VF-AS1/PS1/AS3.
▼ If the inverter begins to emit smoke or an unusual odor, or unusual sounds,
Mandatory
immediately turn power off. If the equipment is continued to operate in such
a state, the result may be fire. Call your local sales agency for repairs.
■ Transportation & installation
▼ Do not install or operate the inverter if it is damaged or any component is
missing. This can result in electric shock or fire. Please consult your local
sales agency for repairs.
Prohibited
▼ Do not place any inflammable objects nearby. If a flame is emitted due to
malfunction, it may result in a fire.
▼ Do not install in any location where the inverter could come into contact
with water or other fluids. This can result in electric shock or fire.
▼ Must be used in the environmental conditions prescribed in the instruction
manual. Use under any other conditions may result in malfunction.
Mandatory
▼ Do not install in any area where the unit would be subject to large amounts
of vibration. That could result in the unit falling, resulting in injury.
Prohibited
and then continue to read the
Warning
Warning
Caution
E6581436

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents