Table of Contents
Advertisement
6.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your video recorder needs
to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* VPS or PDC on or off
The video recorder stores all the information in a TIMER block.
You can programme up to 6 TIMER blocks a month in advance.
'VPS' (Video Programming System) and
'PDC' (Programme Delivery Control)
With 'VPS and PDC', the TV station controls the start time and
the length of the recording. This means that the video recorder
switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme's start time (for example, 20.15 and VPS 20.14),
you must enter '20.14' as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with 'ShowView')
All the important information needed for a programming is
contained in the ShowView-programming number.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press
on the remote control.
TIMER k
c
Enter the entire ShowView-number (up to 9 digits) printed
in your TV guide next to the start time of a TV programme.
For example, 5-312-4 or 5 312 4
Enter 53124 for the ShowView-number.
20
D If you make a mistake, you can clear your
instructions with
SHOWVIEW
SHOWVIEW NUMBER
53124----
________________________________
REP.pSELECT
TIMER LISTpTIMER
d
Use
to select daily or weekly programming.
SELECT
'ONCE': Recording once
'MO-FR': Recordings every day from Monday to Friday.
'WEEK.': Recordings every week on the same day of the
week.
e
Confirm with
. Your programming details will then
OK
appear on the TV screen.
TIMER
DATE REP. PROG. START PDC
21 MO-FR
01
________________________________
D If SHOWVIEW does not recognise the TV channel,
'SELECT PROG. NR.' will appear on the TV
screen. Select the desired programme number (or
channel name) with the number buttons
remote control and confirm with
D If 'SHOWVIEW NUMBER NOT VALID' appears on
the TV screen, this means you entered an incorrect
ShowView number or the incorrect date for the
recording. The start of the programmed recording
must be within the next 7 days. Correct your
instructions or end with
D If 'MO-FR PROGRAMMING NOT POSSIBLE
FOR WEEKEND' appears on the TV screen, you
have programmed a the wrong day for the daily
recording. Daily programming can only be used for
recordings to be made from Monday to Friday.
D Under 'START', use
or off. If ']' appears on the screen, the function has
been switched on.
f
Confirm with
when the information is correct.
OK
.
CLEAR (CL)
REP.
ONCE
STOREpOK
VPS
END
20:00
]
21:30
STOREpOK
on the
0-9
.
OK
.
TIMER k
to switch 'VPS/PDC' on
SELECT
Advertisement
Table of Contents
