Table of Contents
Advertisement
1.
CONNECTING YOUR VIDEO RECORDER
Placing the batteries in the remote control
a
Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b
Close the battery compartment.
Connecting your video recorder to the
TV set
We recommend the use of a scart cable. This will give you the
best picture and sound quality.
If you install your video recorder for the first time, select one of
the following options:
E 'Connecting with a scart cable'
If your TV set has a scart socket and you are using a
scart cable.
E 'Connecting without a scart cable'
If you are not using a scart cable.
4
Connecting with a scart cable
a
Switch off the TV set.
b
Remove the aerial cable plug from your TV set and insert
it into the
socket at the back of the video recorder.
2
c
Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d
Plug one end of a scart cable into the
socket at the back of the video recorder and the other
end into the suitable scart socket on your TV set (see
instruction manual TV set).
e
Switch on the TV set.
f
Insert one end of the mains cable into the mains socket
at the back of the video recorder and the other end
4
into the wall socket.
g
If your TV set automatically switches to programme
number e.g.: 'EXT', '0', or 'AV', this text will appear on the
TV screen:
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
D If your TV set does not switch to programme number
e.g.: 'EXT', '0', or 'AV' automatically, select the
programme number for the video recorder manually
(see instruction manual TV set).
3
scart
AV1 EXT1
CONTINUEpOK
Advertisement
Table of Contents
