Switching The Modulator On / Off - Philips VR220/07 User Manual

OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY 583
MODULATOR ON
________________________________
EXITpMENU STOREpOK
Suppressing interference

Switching the modulator on / off

If you cannot clear picture or sound interference despite optimisation, you can switch off the
built-in modulator.
Warning:
this is only possible if you have connected the video recorder to the TV set with a
scart cable. Without a scart cable you will not receive a picture from the video
recorder on the TV set when the modulator is switched off.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press STOP/EJECT ? to eject any cassette that might be in the
device.
3
Press the STOP h button on the remote control. Then press
STOP/EJECT ? until the set modulator frequency, e.g. 'M583'
appears in the display.
4
Select the line 'MODULATOR' on the TV screen or 'MOD+' in the
display with P ;q or P =r .
p
5
Select 'OFF' on the TV screen with QSr or in the display 'MOD-'
(modulator off).
How can I switch the modulator back on?
In the display, select 'MOD+' (modulator on) with
6
Confirm with OK .
7
To end, press MENU .
QSr
.
49