Philips VR220/07 User Manual page 39

VIDEO PLUS+
PLUSCODE NUMBER REP.
53124---- èONCE
________________________________
REP.pSELECT STOREpOK
TIMER LISTpTIMER
TIMER
DATE REP. PROG. START PDC END
21 MO-FR 01 20:00
________________________________
REP.pSELECT STOREpOK
Programming a recording (TIMER)
Selecting onetime/daily/weekly recordings
p
Using
'ONCE': Recording once
'MO-FR': Repeated daily recordings (Monday to Friday)
'WEEK.': Repeated weekly recordings (every week on the same day)
4
Confirm with OK .
a The following message appears on the screen: 'SELECT PROG.
VPS
b The programme number of the TV channel has not yet been assigned to
] 21:30
a The following message appears on the screen: 'PLUSCODE NUMBER
b The entered PlusCode number is incorrect. Correct your instructions or
b Check the time/date (see chapter 'Installing your video', section 'Setting the
a The
b A daily recording was entered for the wrong day. Daily programming can
5
The decoded data appears after confirmation. You can go back at any
time to change the data.
Switching on 'VPS/PDC' in the 'START' input field
Select the 'START' input field using
'VPS/PDC' (']' lights up). If you press
'VPS/PDC' off (']' goes out).
6
When all information is displayed correctly, confirm with OK . The
programming information is stored in a TIMER block.
7
Insert a cassette with an intact security tab (unprotected).
8
Switch off with STANDBY/ON m .
The programmed recording will only function when the video
recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video
recorder display.
SELECT
, select from the following options:
NR.'
the PlusCode number. Using the number buttons
control, select the corresponding programme number (programme name)
of the TV channel and confirm with
NOT VALID'
MENU
end with .
time and date').
following message appears
PROGRAMMING NOT POSSIBLE FOR WEEKEND'
only be used for recordings to be made from Monday to Friday.
0-9
on the remote
OK
.
on the screen:
TIMER k
SELECT
. Using switch on
SELECT
again, you will switch
'MO-FR
35