JVC MX-GA9V Service Manual page 13

3.1.11 Removing the power transformer assembly
(See Fig.23, 24)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear pan-
el.
(1) Disconnect the wires from connector
on the power board.
(2) Disconnect the wire from connector
tor board.
(3) Release the wire from the stopper on the regulator board.
(4) Remove the four screws L attaching the transformer as-
sembly.
CN218 and CN219
CN204 on the regula-
Power board
CN219
CN218
Power transformer assembly
Fig.23
L
Power transformer
assembly
Fig.24
Regulator board
CN204
Stopper
L
Regulator board
CN204
(No.MB011)1-13