8.11. Disassembly of SMPS P.C.B.
• Refer to "Disassembly of Back Cabinet Assembly".
• Refer to "Disassembly of Main Chassis Assembly".
Step 1 : Release the Wire from the hook.
Caution : During assembling, ensure the cable wire is properly slot into the hook.
Step 2 : Remove 2 screws.
Step 3 : Remove 2 screws.
Step 4 : Release the Himelon from Sub Chassis Assembly.
Step 5 : Slightly lift up the Sub Chassis Assembly and place at the side as arrow shown.
Caution : Do not exert too much force as it may damage the FFC.
40