Remote Controller Display - Fujitsu AUXB04GALH Service Manual

4-2-4 Remote Controller Display

<< SIMPLE REMOTE CONTROLLER >> UTY-RSKU , UTY-RHKU
ERROR CODE DISPLAY
If an error occurs, the following display will be shown.
( " " will appear in the set room temperature display.)
If " " is displayed, immediately contact authorized
service personnel.
<< WIRED REMOTE CONTROLLER 3 wire type >> UTY-RNKU
ERROR CODE DISPLAY
If an error occurs, the following display will be shown.
( " " will appear in the set room temperature display.)
If " " is displayed, immediately contact authorized
service personnel.
<< WIRED REMOTE CONTROLLER 2 wire type >> UTY-RNRU
If an error occurred, an error icon appears on the Monitor mode screen.
Mode Set Temp.
Status
1. Touch the [Status] on the Monitor
mode screen.
<< WIRED REMOTE CONTROLLER 2 wire type >> UTY-RNRU
This appears automatically on the display if an error occurs.
If an error occurs, the following display
will be shown. (" " will appear in the
"Monitor Mode Screen")
<< GROUP REMOTE CONTROLLER >> UTY-CGGY
ERROR CODE DISPLAY
The air conditioning system must be inspected if "
(error code) appears on the timer and Clock Display, or the
operation lamp is flashing.
*1 ; Model code
Status
Fri 10:00AM
Fan
Air Flow Direction
VT
1
Economy
Off
Monitor
Menu
2. Touch the [Error Information] on
the Status screen.
: "
: Outdoor unit
: Indoor unit
: Group remote controller
: Convertor
Faulty unit No.
(Remote controller address)
Ex. Error code display
Unit number (usually 0)
Error Information
Page 1 3 /
Address
02-01
HZ
Error Code
3
14,15, 41, 44
Anti Freeze
Off
Next
Error
Back
Page
Information
2-digit numbers are corresponding to
the error code
Ex. Error code display
04-06
Error code
Error code
Ex. Error code display
Page 1 5 /
Next
Page
Error code
2-wire remote controller
address
Model code *1
Error code
Ex. Error code display