Maintenance - Fluke 7103 User Manual

Maintenance

13 Maintenance
The calibration instrument has been designed with the utmost care. Ease of
operation and simplicity of maintenance have been a central theme in the
product development. Therefore, with proper care the instrument should require
very little maintenance. Avoid operating the instrument in an oily, wet, dirty, or
dusty environment.
If the outside of the instrument becomes soiled, it may be wiped clean with
a damp cloth and mild detergent. Do not use harsh chemicals on the surface
which may damage the paint.
It is important to keep the well of the calibrator clean and clear of any for eign
matter. DO NOT use chemicals to clean the well.
The bath should be handled with care. Avoid knocking or dropping the
instrument.
If a hazardous material is spilt on or inside the equipment, the user is
responsible for taking the appropriate decontamination steps as outlined by the
national safety council with respect to the material.
If the mains supply cord becomes damaged, replace it with a cord with the
appropriate gauge wire for the current of the instrument. If there are any
questions, call an Authorized Service Center for more information.
Before using any cleaning or decontamination method except those
recommended by Hart, users should check with an Authorized Service Center to
be sure that the proposed method will not damage the equipment.
If the instrument is used in a manner not in accordance with the equip ment
design, the operation of the Micro-Bath may be impaired or safety hazards may
arise.
53
MyFlukeStore
1.877.766.5412
www. .com
Shop for Fluke products online at: