Safety Information; Warnings - Fluke 7103 User Manual

7103 Micro-Bath User's Guide

Safety Information

Symbol
1.2 Safety Information
Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.
The following definitions apply to the terms "Warning" and "Caution".
1.2.1

Warnings

Disclaimer: Hart Scientific manufactures instruments for the purpose of
temperature calibration. Instruments used for applications other than
calibration are used at the discretion and sole responsibility of the customer.
Hart Scientific cannot accept any responsibility for the use of instruments for
any application other than temperature calibration.
GENERAL
DO NOT use the instrument for any application other than calibration work.
The instrument was designed for temperature calibration. Any other use of the unit
may cause unknown hazards to the user.
DO NOT use the unit in environments other than those listed in the user's guide.
Completely unattended operation in not recommended.
DO NOT install access cover without holes onto a bath that is energized. Dangerous
pressures may result from fluids vaporizing.
Follow all safety guidelines listed in the user's manual.
2
Shop for Fluke products online at:
Description
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 re fers to
the level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE
CATEGORY II is energy-consuming equipment to be supplied from the fixed installation.
Examples include household, office, and laboratory appliances.
C-TICK Australian EMC mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/
EC) mark.
"Warning" identifies conditions and actions that may pose hazards to the user.
"Caution" identifies conditions and actions that may damage the instru ment
being used.
MyFlukeStore
www.
1.877.766.5412
.com