Fisher & Paykel aquasmart Installation Instructions And User Manual page 43

Changing pre-set options
ii:i;
1
2
3
You can reset your washer to the defauBt settings it left the factory with.
To reset your washer to its factory settings;
Enter Option Adjustment mode (refer to page 36).
Select the EASY IRON cycle.
The display will show"rSt't Touch START/PAUSE for 3 seconds to reset your washer to its factory
settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment mode and
power off your washer,
Touch POWER to exit if you do not wish to reset your washen
Fig29 Chonging the wosher settings back to the factory def.ault
Remember, to save changes and exit from the Option Adjustment mode at any time (ie to return
to normal operating mode), touch the POWER button,