Fisher & Paykel aquasmart Installation Instructions And User Manual page 40

(Banging p e-set options
1
2
3
All wash temperatures can be individually adjusted if you think they are too hot or too cold.
Note: the hot temperature wiBBbe the same as the hot water suppBy temperature,
To modify the wash temperature;
Enter Option Adjustment mode (refer to page 36).
Sdect the HEAVY cycle.
Sdect the wash temperature you want to adjust, eg WARM, by touching the WASH TEMP button.
The digital display screen shows the current setting.
Touch the MORE [] or LESS[] button {or the HIGH EFFICIENCY button, depending on }.'our
modal of washer) to increase or decrease to the desired temperature. Each increment is equal to
approximately O.9°F (0.5_'C).
Fig.25 Adjusting the temperature setting, eg increosing the _4,/_qRM wosh temperature