Fisher & Paykel aquasmart Installation Instructions And User Manual page 20

AquaSmart controls
SmartTouch Control Dial
The SmartTouch ControB DiaB provides easy and efficient cycle sdection. As you rotate the dial
the cycle sdected will be illuminated, as will the defauBt settings for that cycle on the right of
the controB panel
SmartTouch buttons
The smooth, easy dean buttons require onBy a gentle touch to activate. Use these to power
your washer on and off, start and pause your washer, seBect your wash options, activate
keylock and programme a deBay start.
Digital display screen
The digital dispBay screen provides feedback on how long the wash cycle has to go to keep
you informed throughout the cycle. The screen also displays your DELAY START selection,
should you choose one. The delayed time remaining will show on the screen until the
machine starts. The screen will also display messages to help you with the overall running of
your washer.
Time to go
Your AquaSm(;rd '_' w asher displays approximately how many minutes the cycle has remaining,
so that you can tell at a glance when your washing will be finished. Once you have selected
your wash cycle and options, the time the cycle will take to complete will be displayed. Please
be aware that a number of factors influence the overall cycle time, eg the water flow rate, load
size and wash cycle selection, therefore times will vary.
Keybck mode
Keylock can be used to lock the buttons on your AquoSmart _' when not in use. This will avoid
accidental button pushes from items left on the lid of the washer (eg washing baskets) as well
as touches from any little fingers.
To turn Keylock mode ON or OFF:
Touch and hold the KEYLOCK button for 2 seconds
Note: when activated, the light above the KEYLOCK button is illuminated.
If Keylock mode is activated:
To turn your washer on, touch and hold the POWER button for 2 seconds° This will activate
the display panel. Keylock will remain activated but let you select your wash cycle options and
start the cycle.
To PAUSE your washer at any time during the cycle, touch and hold the START/PAUSE button
for 2 seconds or touch the START/PAUSE button twice in quick succession°
To STOP your washer and power off, simply touch the POWER button°