Mercedes-Benz Audio 20 Operating Instructions Manual page 91

Ejecting an SD memory card
Press the memory card.
X
The memory card is ejected.
Remove the memory card.
X
Connecting USB devices
There are two USB ports in the stowage space
under the armrest.
Connect the USB device to the USB port.
X
The data medium will only be played and
the files will only be loaded in the back-
ground if the corresponding media display
is visible. Otherwise, the system does not
automatically switch to USB. If there are no
supported audio files, you will see a mes-
sage to this effect.
i
MP3 players must support Media Transfer
Protocol (MTP).
Activating media mode
Switching on automatically
After an external media source has been con-
nected, Audio 20 will only activate the corre-
sponding media mode automatically and
show the basic display in the case of CDs and
SD cards. If the CD is started using another
application (e.g. navigation) the display will
not change.
When using USB devices, depending on the
vehicle's equipment, the relevant Media
Interface 1, 2 or USB 1, 2 basic display must
already be activated.
Insert CDs: ( page 88)
X
Y
or
Insert a SD memory card: (
X
or
Connect a USB device: (
X
Audio 20 loads the inserted medium and
playback starts automatically.
page 88)
Y
page 89)
Y
Further options for switching on
Using the number keypad: (
R
Using the main function bar: (
R
Using the device list: (
R
Using the Õ button: (
R
Options menu
In Media mode, slide VÆ the controller.
X
The media menu bar is shown.
To select Options Options: turn and press the con-
X
troller.
Play mode
To select Playback Mode Playback
X
the controller.
Select Normal Track Sequence Normal Track
X
The current track list is played in the order
it appears on the data medium.
Select Random Track List Random Track
X
The current track list is played in random
order.
Select Random Random Medium Medium.
X
All tracks on the data medium are played in
random order.
Audio mode
page 87)
Y
page 87)
Y
page 87)
Y
page 86)
Y
Mode: turn and press
Sequence.
List.
Z
89