Audio 20 Features; General Notes; Equipment - Mercedes-Benz Audio 20 Operating Instructions Manual

Setting access data
112

Audio 20 features

These operating instructions describe all
standard and optional equipment available
for your Audio 20 system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your Audio 20 system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your Audio 20 system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.

General notes

Conditions for access
To use Mercedes-Benz Apps and Internet
access, the following conditions must be ful-
filled:
mbrace is activated and operational
R
mbrace is activated for Mercedes-Benz
R
Apps and Internet access
Priority of connections: an emergency call
has the highest priority. When a service call,
e.g. a breakdown service call or the MB Info
Call, is active, an emergency call can still be
initiated.
A service call, on the other hand, has priority
over a current Internet connection. Therefore,
you cannot establish an Internet connection
during a service call.
i
The availability of individual Mercedes-
Benz Apps may vary depending on the
country.
i
The terms of use are shown when the sys-
tem is used for the first time and then once
a year thereafter. Only read and accept the
terms of use when the vehicle is stationary.
i
The driver is not permitted to call up web-
sites while driving and use of the Mercedes-
Benz Apps is restricted.
Setting access data
General notes
If you use the DUN Bluetooth
CDC/ACM USB class: you will need Internet
access data for the connected mobile phone
to use the online and Internet functions. You
can obtain this from your mobile phone net-
work provider. If the PAN Bluetooth
or the RNDIS, CDC/NCM or CDC/ECM USB
classes are supported, then the Internet
access data set on the phone is used. It is
then no longer necessary to set the Internet
access data in Audio 20.
Enabling and setting up a mobile
phone for Internet functions
Calling up mobile network providers
In order to set up a mobile phone for Internet
access, the mobile phone must be connected
with the system via Bluetooth
or via USB ( page 89).
Y
Press the % button.
X
The last function called up appears.
Select TEL/ TEL/® in the main function bar by
X
sliding 5 and pressing the controller.
A menu appears.
To select Internet Internet: turn and press the
X
controller.
The menu appears.
To select Settings: slide 6 the control- Settings
X
ler, turn and press to confirm.
A menu appears.
To select Configure Internet Set‐ Configure Internet Set‐
X
tings: turn the controller and press to con- tings
firm.
A menu appears.
Select Search for Internet Devices Search for Internet
X
A text display appears.
If mobile phones are already set up for the
Internet functions and are connected with
the system: a list of the mobile phones that
®
profile or the
®
profile
®
( page 56)
Y
Devices.