Mercedes-Benz Audio 20 Operating Instructions Manual page 32

Display settings
30
Audio 20 features
These operating instructions describe all
standard and optional equipment available
for your Audio 20 system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your Audio 20 system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your Audio 20 system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
Press the Ø button.
X
The Vehicle Vehicle
To select System Settings System
X
controller, turn and press to confirm.
A menu appears.
To select Display: turn and press the con- Display
X
troller.
A menu appears.
Select Brightness. Brightness
X
A control appears.
Select the desired brightness.
X
menu appears.
Settings: slide 6 the
Display design
The display features optimized designs for
daytime and night-time operation. You can
set the design by manually selecting day or
night design or opt for an automatic setting.
Press the Ø button.
X
The Vehicle Vehicle menu appears.
To select System Settings System Settings: slide 6 the
X
controller, turn and press to confirm.
A menu appears.
To select Display: turn and press the con- Display
X
troller.
A menu appears.
Select Day Mode Day Mode, Night Mode Night Mode
X
The # dot indicates the current setting.
Design Explanation
Day Mode Day Mode The display is set perma-
nently to day design.
Night Mode Night Mode The display is set perma-
nently to night design.
Automatic Automatic In the
ting, Audio 20 evaluates
the readings from the
light sensor and auto-
matically switches the
display design.
Switching the display on/off
Press the Ø button.
X
The Vehicle Vehicle menu appears.
To select Display Off Display
X
troller, turn and press to confirm.
The display goes out.
To switch the display on again: press the
X
controller.
or Auto. Auto
Automaticset- Automatic
Off: slide 6 the con-