are already set up and connected appears
instead of the text display.
The display appears automatically if there
is not yet any mobile phone connected.
Select
Start Search
Start
Search.
X
Detected mobile phones are entered in a
list.
Mobile phones are displayed that:
are connected
R
are supported by the system for Internet
R
functions but have not yet been set up for
the Internet function
Select the desired mobile phone.
X
The # dot indicates the selected mobile
phone. A text display appears.
Phones that support the PAN Bluetooth
profile or the RNDIS, CDC/NCM or CDC/
ECM USB classes are already set up. You
can establish an Internet connection
(
page 117).
Y
There are two options for mobile phones that
support the DUN Bluetooth
CDC/ACM USB classes:
Option 1:
Select the predefined access data of the
X
mobile phone network provider
(
page 113).
Y
Option 2:
Manually setting the access data of the
X
mobile phone network provider
(
page 114).
Y
Selecting the predefined access data of
the mobile phone network provider
Searching for providers
®
To select
Predefined Settings
Predefined Settings
X
menu: turn and press the controller.
A list of countries appears.
Confirm
Confirm Settings
Settings, if the information is
X
correct. If the information is not correct,
you can edit the setting (
If the mobile phone network provider pro-
vides multiple access data options, the rele-
vant access data still has to be selected. This
Setting access data
®
profile or the
in the
page 115).
Y
113