Starting / Stopping The Engine - Stihl HT 70 Instruction Manual

Starting / Stopping
the Engine
6 5 4
3
STOP
Controls
Throttle trigger interlock (1), throttle
trigger (2) and slide control (3) with the
positions:
START (4)
The normal run position # (5)
and
$ – STOP (6) for stopping the engine..
HT 70, HT 75
3
1
2
Starting
:
Hold down the trigger interlock and
squeeze the throttle trigger.
:
Keep both levers in that position.
:
Move the slide control to START
position and hold it there.
:
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the
starting-throttle position.
8
9
If engine is cold:
Set the choke lever (8) to g
If engine is warm:
Set the choke lever (8) to e
Also use this setting if engine has been
running but is still cold.
: Press the fuel pump bulb (9) at least
five times, even if the bulb is still
filled with fuel.
english
8
23