Cisco 8861 Deployment Manual page 49

To view the current A-MPDU and A-MSDU configuration, enter either show 802.11a for 5 GHz or show 802.11b for 2.4 GHz.
802.11n Status:
A-MSDU Tx:
Priority 0............................... Disabled
Priority 1............................... Enabled
Priority 2............................... Enabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Enabled
Priority 4............................... Enabled
Priority 5............................... Enabled
Priority 6............................... Disabled
Priority 7............................... Disabled
CleanAir
CleanAir should be Enabled when utilizing Cisco access points with CleanAir technology in order to detect any existing
interferers.
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
49