Certificate Removal; Bluetooth Settings - Cisco 8861 Deployment Manual

Certificate Removal

Certificates can be removed either via the admin webpage interface or via the local user interface.
To remove a certificate via the admin webpage, select Delete for the corresponding certificate, then restart the phone once a
certificate has been removed.

Bluetooth Settings

The Cisco IP Phone 8861 and 8865 have Bluetooth 3.0 support, which enables hands-free communications.
To pair a Bluetooth headset to the Cisco IP Phone 8861 and 8865, follow the instructions below.
•
Navigate to Applications > Bluetooth.
•
Ensure that Bluetooth is set to On.
Ensure Bluetooth is enabled in the Cisco Unified Communications Manager; otherwise the option will not be visible in
the settings menu.
•
Select Add Bluetooth device.
Ensure the Bluetooth device is in pairing mode.
•
Select the Bluetooth device after it is displayed in the list.
•
The Cisco IP Phone 8861 and 8865 will then attempt to pair will attempt to use the pin code 0000.
If unsuccessful, enter the pin code when prompted.
•
Once paired, then the Cisco IP Phone 8861 and 8865 will attempt to connect to the Bluetooth device.
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
189