Cisco 8861 Deployment Manual page 121

•
If Provide Shared Credentials is checked, then the specified Username and Password will be utilized for all Cisco IP
Phone 8861 and 8865 that utilize this Wireless LAN Profile.
•
Up to 64 characters can be entered for the Username and Password.
•
A Password Description can optionally be entered.
•
If EAP-TLS is selected then User Certificate must be configured to specify the type of user certificate to utilize for
EAP-TLS authentication.
•
Can set User Certificate to MIC (Manufacturing Installed Certificate) or User Installed.
•
If PSK is selected to utilize Pre-Shared Key authentication, then a PSK Passphrase must be entered.
•
The PSK Passphrase must be in one of the following formats:
•
8-63 ASCII character string
•
64 HEX character string
•
A Password Description can optionally be entered.
•
If WEP is selected to utilize static WEP (Wired Equivalent Privacy) authentication, then a WEP Key must be entered.
•
Only WEP key 1 is supported, so need to ensure that the entered key matches transmit key on the access point side.
•
The WEP Key must be in one of the following formats:
•
40/64 Bit Key = 5 digit ASCII or 10 digit HEX character string
•
104/128 Bit Key = 13 digit ASCII or 26 digit HEX character string
•
A Password Description can optionally be entered.
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
121