Using A Cardreader; General Guidelines - Datamax MICROFLASH 4TE User Manual

MICROFLASH 4TE PRINTER USER'S GUIDE

Using a CardReader

Note: he following information applies to printers
T
installed with the CardReader option.
Figure 15

General Guidelines

To wake up the CardReader, insert a card into the

CardReader slot. One short beep indicates the
CardReader/printer is awake.
If you are using a Smart CardReader, insert a card

with the gold contacts facing away from the printer
and leave the card in CardReader slot.
If you are using a Magnetic CardReader, insert a

card with the stripe facing toward the printer, then
slowly remove the card from the CardReader slot.
For information on CardReader LED indicators and

audio indicators, see
page 10
.
CardReader
CardReader
Slot
LED
Audio Indicators and LEDs on
14